| Place of Origin: | Guangdong,China |
|---|---|
| Certification: | ROHS,SGS |
| Model Number: | M-TS080 |
| Minimum Order Quantity: | Negotiation |
| Price: | Negotiation |
| Packaging Details: | Packed in Carton |
| Delivery Time: | 3~8 Days |
| Payment Terms: | T/T |
| Supply Ability: | 1000000 Roll/Day |
| Keywords: | Thermally Conductive Adhesive Double Sided Masking Tape | Side: | Double Sided |
|---|---|---|---|
| Length: | 50m | Width: | 6mm Or Customized |
| Color: | White | MOQ: | 5 Rolls |
| Material: | Glass Fibre Cloth, Glass Fibre Cloth | ||
| High Light: | 50m length electrical insulation tape,0.069MPa electrical insulation tape,50m length double sided heat sink tape |
||
Thermally Conductive Adhesive Transfer Tape M-TS080 is designed to provide a preferential heat-transfer path between
heat-generating components and heat sinks or other cooling devices (e.g., fans, heat spreaders or heat pipes)
The specialized chemistry of this tape renders them modestly soft and able to wet to many surfaces, allowing them to conform well to non-flat substrates, provide high adhesion, and act as a good thermal interface.
Physical Properties
|
Property |
M-TS080-015 |
M-TS080-025 |
Unit |
Test Method |
||
|
Backing Type |
Fiberglass |
一 |
一 |
|||
|
Color |
White |
Visual |
Visual |
|||
|
Thermal conductivity |
0.8 |
W/M-K |
ASTM D5470 |
|||
|
Temperature range |
-20~120 |
℃ |
EN344 |
|||
|
Thickness |
0.15±0.03 |
0.25±0.03 |
mm |
一 |
||
|
Compressive strength |
≧2 |
≧3 |
K v/mm |
ASTM D149 |
||
|
Thermal Impedance@50psi |
0.7 |
1.1 |
℃- in2/W |
ASTM D5470 |
||
|
Temperature range |
-20~120 |
℃ |
EN344 |
|||
| Peel Adhesion |
>1000(Steel,lmmediate) |
g/inch |
PSTC-1 |
|||
|
>1200(Steel after 24 hrous) |
g/inch |
PSTC-1 |
||||
| Holding Power |
>48(1000G*25℃) |
H/inch |
PSTC-7 |
|||
|
>48(1000G*80℃) |
H/inch |
PSTC-7 |
||||
|
Suggested Use of Pressure
|
Pressure |
Temperature |
Time |
一 |
一 |
|
|
10psi(0.069MPa) |
25℃ |
20sec |
一 |
一 |
||
|
10psi(0.069MPa) |
50-75℃ |
5sec |
一 |
一 |
||
Product Advantage
1.No drying, no chalking
2.Good thermal conductivity, viscidity and insulation
3.Can be made different thickness and size as your request
4.Easy to operate, it can improve the production efficiency
5.No screw, help to save the cost
6.Long operating life
Product application
LED baseplate, fluorescent lamp, panel light, ceiling light, wall light
The connection and thermal conductivity of light metal frame
Let the radiator fixate to the circuit board
Between car control circuit and thermal slug
Between cooling accessories and LED bar accessories
In place of hot melt glue, screw
Packaging Details: in box
Delivery Details: after payment 1-3 working days
Payment Terms: Bank Transfer, T/T, Paypal
Q:What’s the thermal conductivity test method given on the data sheet?
A: All the data in the sheet are tested out by the third party. ASTM D5470 is utilized to test the thermal conductivity.
Q: How to find a right thermal conductivity for your application?
A: It depends on the watts of power source, ability of heat dissipation. For any customers, please contact us for the technical support.
Q: Are thermal pads reworkable?
A: It’s depend on the application and the pad being used. Thermal pads have been reused before, however,it’s up to the judgment of product designer, to see whether the pads could withstand reuse.
Q:Will the heat make the thermal pads softer?
A: ShoreC 20~80 ,there is no significant change in the hardness of thermal pads, as gap filler.
Q: What’s the tolerance for the thickness?
A :Normally ±0.1mm.
Q: Are the thermal pads electrical insulating?
A: Yes, all thermal pads are electrically isolated.
Q: What’s the shelf life for thermal pads?
A: Shelf life for thermal pad is one year after the date of manufacture. For the pads with adhesive, the shelf life is 6months after the date of manufacture. After these dates, all the characters should be retested.
Q: Can the thermal pads be with fiberglass?
A: YES, we could have thermal pads with fiberglass center to improve customer specific requirements for the tensile strength.M-TS series has fiberglass on its surface, all other models will be made at your requirement.
