| Place of Origin: | China |
|---|---|
| Certification: | ROHS,UL,REACH |
| Model Number: | LM-PCM |
| Minimum Order Quantity: | Negotiation |
| Price: | Negotiation |
| Packaging Details: | Packed in Carton |
| Delivery Time: | 3~7 Work days |
| Payment Terms: | T/T |
| Supply Ability: | 100000PCS/Day |
| Material: | EPDM | Thickness: | 0.13 - 0.6mm |
|---|---|---|---|
| Density: | 2.7g/cm Cube | Phase Change Temperature: | 45 - 55*C |
| Size: | Tailor-made/ Diecut | Model Number: | Phase Change Materials |
| Thermal Conductivity: | 3.0W/mk | Colour: | Grey/ Yellow/ Pink |
| High Light: | 0.6mm thickness thermal phase change material,2.7g/cm3 thermal interface materials,0.6mm thickness thermal interface materials |
||
Phase Change Temperature 45 - 55*C Thermal Phase Change Gap Filler Materials
LM-PCM is a thermal phase change Materials(PCM).The phase change Temperature is 50℃.It is solid sheet At room temperature ,and it begins to Soften and flow at temperature above Its transition temperature. Also,it is inherently tacky, flexible and withe inherently tacky, flexible and with Cut and used between the radiator and Power consumption electronic devices To reduce the thermal resistance. This material is easy to operate and has high reliability.
Physical Properties
|
Proroperty |
LM-PCM100 |
Unit |
Tolerance |
TestMethod |
|
Composition |
Filled EPDM |
- |
||
|
Color |
Grey/Yellow/Pink |
- |
- |
Visal |
|
Thermal Conductive |
3 |
W/MK |
- |
ASTMD5470 |
| Thickness |
2.4~20(1ml=0.0254mm) |
mil |
±0.03mm |
ASTMD374 |
|
0.06~0.5 |
mm |
A STMD374 |
||
|
Phase Change Temp |
45~55 |
℃ |
- |
- |
|
Density |
2.7 |
g/cm3 |
- |
- |
|
Thermal Impendance@50Ps |
0.02-℃in2/W 0.12-℃in2/W |
- |
- |
ASTMD5470 |
|
Temperature Range |
-40~+130 |
℃ |
- | - |
|
Dielectric Constant |
3.1 |
MHZ |
- |
ASTMD150 |
|
Standrad Sheet Size |
300*400 |
mm |
- |
- |
|
Volume Resistivity |
10^13 |
ohm-cm |
- |
ASTMD150 |
|
Shelf Life |
12 |
Month |
- |
AMG |
Product Details
PackageAnd Shipping
Q:What’s the thermal conductivity test method given on the data sheet?
A: All the data in the sheet are tested out by the third party. ASTM D5470 is utilized to test the thermal conductivity.
Q: How to find a right thermal conductivity for your application?
A: It depends on the watts of power source, ability of heat dissipation. For any customers, please contact us for the technical support.
Q: Are thermal pads offered with tacky?
A: Yes, all the thermal pads have its inherent tacky. All the models are natural tacky for two sides, except for the LCP series ,only one side has natural tacky. LCB series thermal pads can be cover 3M glue with strong
adhesive.
Q: Are thermal pads reworkable?
A: It’s depend on the application and the pad being used. Thermal pads have been reused before, however,it’s up to the judgment of product designer, to see whether the pads could withstand reuse.
Q:Will the heat make the thermal pads softer?
A: ShoreC 20~80 ,there is no significant change in the hardness of thermal pads, as gap filler.
Q: What’s the tolerance for the thickness?
A :Normally ±0.1mm.
Q: Are the thermal pads electrical insulating?
A: Yes, all thermal pads are electrically isolated.
Q: What’s the shelf life for thermal pads?
A: Shelf life for thermal pad is one year after the date of manufacture. For the pads with adhesive, the shelf life is 6months after the date of manufacture. After these dates, all the characters should be retested.
Q: Can the thermal pads be with fiberglass?
A: YES, we could have thermal pads with fiberglass center to improve customer specific requirements for the tensile strength.LCP series has fiberglass on its surface, all other models will be made at your requirement.
