2.67g/Cm3 3.0w/M.K Phase Change Thermal Interface Material

Basic Information
Place of Origin: China
Certification: ROHS,UL,REACH
Model Number: LM-PCM
Minimum Order Quantity: Negotiation
Price: Negotiation
Packaging Details: Packed in Carton
Delivery Time: 3~7 Work days
Payment Terms: T/T
Supply Ability: 100000PCS/Day
Detail Information
Features: High Stickiness Surface, Easy To Use Materia: Other
Proportion: 2.67±0.20 G/cm 3 Thickness: Can Be Specially Customized
Tensile Strength: Excellent Color: Dark Gray,Blue
Thermal Conductivity: 3.00±0.30 W/m.k Benefits: Very Low Thermal Resistance
High Light:

3.0w/m.k phase change material insulation


2.67g/cm3 high temperature phase change materials


phase change material insulation

Product Description

Very Low Thermal Resistance 3W/MK Phase Change Thermal Interface Materials


Product Description

     LM-PCM300(Phase Change Material) provides a very low thermal resistance for heat transferance modules such as efficient processor and heat sink. The phase state of this material can be changed at 50℃-52℃. The product is a fluid sticky material but will not be overflowed, which can fill the gap,wet the contacted surface thoroughly and improve the efficiency of heat transferance.

LM-PCM300thermal conductive gasket has its inherent adhesive property, meanwhile it can cover the tiny uneven surface so that make the mating parts fully contacted, thus improve the efficiency of the heat conduction.

Features and Benefits
Very low thermal resistance

High stickiness surface, easy to use
RoHS recognized

Configurations Available:

Standard sheet size :240×240 mm,and can be cutted according to customer requirement
Thickness can be specially customized
Can be laminated with the adhesive film according to customer demand



Phase Change Material Products Parameter

est item Test method Unit Test Value
Color Visual - Grey/Blue
Thickness ASTM D374 mm 0.003"/0.005"/0.008"/0.010"mm
Thickness tolerance
ASTM D371 mm ±0.016
Specific Gravity ASTM D792 G/CM3 3.0
Dielectric Constant ASTM D150 1MHZ 3.5
Continuous Use Temp EN344 -40 to +200
Volume Resistivity ASTM D257 Ω-CM 2.0*1013
Phase change soften temperatire     50~60°c
Conductivity ASTM D5470 W/M.K 3.0w/m.k


Product Details



2.67g/Cm3 3.0w/M.K Phase Change Thermal Interface Material 02.67g/Cm3 3.0w/M.K Phase Change Thermal Interface Material 12.67g/Cm3 3.0w/M.K Phase Change Thermal Interface Material 2

PackageAnd Shipping


2.67g/Cm3 3.0w/M.K Phase Change Thermal Interface Material 3


Q:What’s the thermal conductivity test method given on the data sheet?
A: All the data in the sheet are tested out by the third party. ASTM D5470 is utilized to test the thermal conductivity.

Q: How to find a right thermal conductivity for your application?
A: It depends on the watts of power source, ability of heat dissipation. For any customers, please contact us for the technical support.

Q: Are thermal pads offered with tacky?
A: Yes, all the thermal pads have its inherent tacky. All the models are natural tacky for two sides, except for the LCP series ,only one side has natural tacky. LCB series thermal pads can be cover 3M glue with strong



Q: Are thermal pads reworkable?
A: It’s depend on the application and the pad being used. Thermal pads have been reused before, however,it’s up to the judgment of product designer, to see whether the pads could withstand reuse.

Q:Will the heat make the thermal pads softer?
A: ShoreC 20~80 ,there is no significant change in the hardness of thermal pads, as gap filler.

Q: What’s the tolerance for the thickness?
A :Normally ±0.1mm.

Q: Are the thermal pads electrical insulating?
A: Yes, all thermal pads are electrically isolated.

Q: What’s the shelf life for thermal pads?
A: Shelf life for thermal pad is one year after the date of manufacture. For the pads with adhesive, the shelf life is 6months after the date of manufacture. After these dates, all the characters should be retested.

Q: Can the thermal pads be with fiberglass?
A: YES, we could have thermal pads with fiberglass center to improve customer specific requirements for the tensile strength.LCP series has fiberglass on its surface, all other models will be made at your requirement.


Contact Details

Phone Number : +8613560312553

WhatsApp : +8613560312553